Client kitchen design2
Client kitchen design2
Hi All
Here is my latest designs for a high end client kitchen.
Your comments welcome as usual
Here is my latest designs for a high end client kitchen.
Your comments welcome as usual
- Attachments
-
- JB1873A1_filtered1.jpg (141.72 KiB) Viewed 13179 times
Re: Client kitchen design2
Are you sure about your composition?
To me, the kitchen is not the main subject.
If you want to keep that overall view, I would add some detail to the architectural elements. Those are distracting me from the kitchen.
Jerome
To me, the kitchen is not the main subject.
If you want to keep that overall view, I would add some detail to the architectural elements. Those are distracting me from the kitchen.
Jerome
Re: Client kitchen design2
Hi Jerome
This render is just the first of 5 or 6 compositions. The other views will be centered more in the kitchen itself.
Dan
This render is just the first of 5 or 6 compositions. The other views will be centered more in the kitchen itself.
Dan
Re: Client kitchen design2
majid's Ssteel works great for me.
But I dont remember where I found it. I recommend it. ( BTW I leave the scale as is and it looks great once rendered)
But I dont remember where I found it. I recommend it. ( BTW I leave the scale as is and it looks great once rendered)
Re: Client kitchen design2
Jerome
I've used a Brushed Steel that Fletch recommended. I think I've put too much bump on it. Looks a lot better close up.
BTW I've just purchased the entire Arroway collection Wood1, Wood2, Wood3, Tiles Concrete etc etc. There are some really smart textures in the pack!!
I've used a Brushed Steel that Fletch recommended. I think I've put too much bump on it. Looks a lot better close up.
BTW I've just purchased the entire Arroway collection Wood1, Wood2, Wood3, Tiles Concrete etc etc. There are some really smart textures in the pack!!
Re: Client kitchen design2
so far! Great lighting.
- Attachments
-
- questions.jpg (78.32 KiB) Viewed 13104 times
Re: Client kitchen design2
Had a bit of trouble with all the areas you mentioned Fletch. I still have trouble with lighting and my brushed steel texture is not quite right
Here is the next image. Centred on the kitchen itself
Here is the next image. Centred on the kitchen itself
- Attachments
-
- JB1873B1_filtered1.jpg (123.39 KiB) Viewed 13095 times
Re: Client kitchen design2
Looking great - maybe try exporting the same view from SU as all white with only edge lines, and do an overlay at like 20% Just to pop the cabinet edges for clarity.
Re: Client kitchen design2
Dan_ddd wrote:Jerome
BTW I've just purchased the entire Arroway collection Wood1, Wood2, Wood3, Tiles Concrete etc etc. There are some really smart textures in the pack!!
I might someday buy wood 3, but those packs are kinda expensive...
I much prefer that new composition. Your under-cab lights looks weird though.
-
- Posts: 15
- Joined: Sat May 08, 2010 10:51 am
- SketchUp: SU 7.1
- Location: UAE Abu Dhabi
- Contact:
Re: Client kitchen design2
For me i think you need to changed the table, because design of the table is different fron the kitchen.
Nothing is impossible when it comes to structure
Who is online
Users browsing this forum: Bing [Bot] and 3 guests