Little Red Vanity
-
- Posts: 311
- Joined: Mon May 04, 2009 4:12 pm
- SketchUp: 15
- Location: Beautiful, British Columbia, Canada
Little Red Vanity
Little Red Vanity: A couple of images, color, sepia version, SU mesh. Easy 10, 106 passes.
- Attachments
-
- red_vanity_800x602.jpg (217.9 KiB) Viewed 9967 times
-
- red_vanity_sepia_800x602.jpg (247.4 KiB) Viewed 8649 times
-
- red_cabinet_mesh_800x602.jpg (199.92 KiB) Viewed 9224 times
Re: Little Red Vanity
No Comment
-
- Posts: 650
- Joined: Thu Sep 03, 2009 2:26 pm
- SketchUp: SU8 to SU2019 Pro
- Location: Adelaide, South Australia
- Contact:
Re: Little Red Vanity
+1...!!
Re: Little Red Vanity
+1000
Yet, the metal strip seems to be too perfect, too clean. Try to use a anisotropy map for scratches and a small clouds bump to avoid reflections that are too linear, it needs some distortion (like nothing is perfect)
Yet, the metal strip seems to be too perfect, too clean. Try to use a anisotropy map for scratches and a small clouds bump to avoid reflections that are too linear, it needs some distortion (like nothing is perfect)
ARTIST AND DESIGNER DEREI.UK
Re: Little Red Vanity
High class, work, Rick!
Re: Little Red Vanity
awesome!!! I like it. would you mind sharing the DOF setting?
-
- Posts: 311
- Joined: Mon May 04, 2009 4:12 pm
- SketchUp: 15
- Location: Beautiful, British Columbia, Canada
Re: Little Red Vanity
Thanks all.
See the Twilight User Manual page 38. (The table of contents says page 39, but actually 38)
Good advice. I understand what you are saying. I can implement the bump but not sure how to add the scratch map in Twilight?dereeei wrote:Try to use a anisotropy map for scratches and a small clouds bump to avoid reflections that are too linear, it needs some distortion (like nothing is perfect)
I set the camera focal point on the nearest cabinet pull,(ctrl, left click) then updated the scene to save that change. I used an F-stop setting of 4 in this render.jchau2007 wrote: would you mind sharing the DOF setting?
See the Twilight User Manual page 38. (The table of contents says page 39, but actually 38)
Who is online
Users browsing this forum: No registered users and 2 guests