My future new PC computer gamer
-
- Posts: 79
- Joined: Sun Jun 12, 2011 3:49 pm
- SketchUp: 8.0.4811
- Location: Montpellier, France
- Contact:
Re: My future new PC computer gamer
Hi,
The graphic card advance. it is carried out at 50%.
Many components shown for the best fidelity to the model.
To be continued ...
The graphic card advance. it is carried out at 50%.
Many components shown for the best fidelity to the model.
To be continued ...
- Attachments
-
- Phantom-GTX-680_50a.jpg (58.49 KiB) Viewed 12955 times
-
- Phantom-GTX-680_50b.jpg (48.67 KiB) Viewed 12955 times
New PC project : http://www.vuedehaut.fr/3D/PC/phantom.html
-
- Posts: 79
- Joined: Sun Jun 12, 2011 3:49 pm
- SketchUp: 8.0.4811
- Location: Montpellier, France
- Contact:
Re: My future new PC computer gamer
Hi,
Here is the finished card to 65% (it is the part for ventilation and to cover).
Following the next post ...
Here is the finished card to 65% (it is the part for ventilation and to cover).
Following the next post ...
- Attachments
-
- vue10.jpg (143.98 KiB) Viewed 12954 times
-
- vue11.jpg (136.37 KiB) Viewed 12954 times
-
- vue12.jpg (104.08 KiB) Viewed 12954 times
New PC project : http://www.vuedehaut.fr/3D/PC/phantom.html
-
- Posts: 79
- Joined: Sun Jun 12, 2011 3:49 pm
- SketchUp: 8.0.4811
- Location: Montpellier, France
- Contact:
Re: My future new PC computer gamer
Hi,
It is done, the graphics card is over!
I realized a lot of pictures seen here: http://www.vuedehaut.fr/3D/PC/phantom.html
To be continued ...
It is done, the graphics card is over!
I realized a lot of pictures seen here: http://www.vuedehaut.fr/3D/PC/phantom.html
To be continued ...
- Attachments
-
- vue14b.jpg (52.26 KiB) Viewed 12955 times
New PC project : http://www.vuedehaut.fr/3D/PC/phantom.html
-
- Posts: 79
- Joined: Sun Jun 12, 2011 3:49 pm
- SketchUp: 8.0.4811
- Location: Montpellier, France
- Contact:
Re: My future new PC computer gamer
Last view of this project...
- Attachments
-
- vue21b.jpg (107.76 KiB) Viewed 12956 times
New PC project : http://www.vuedehaut.fr/3D/PC/phantom.html
Re: My future new PC computer gamer
truly impressive! A labor of love
-
- Posts: 79
- Joined: Sun Jun 12, 2011 3:49 pm
- SketchUp: 8.0.4811
- Location: Montpellier, France
- Contact:
Re: My future new PC computer gamer
Now, the HD VelociRaptor (recto/verso)
- Attachments
-
- vue22.jpg (69.41 KiB) Viewed 12956 times
-
- vue23.jpg (103.68 KiB) Viewed 12956 times
New PC project : http://www.vuedehaut.fr/3D/PC/phantom.html
-
- Posts: 79
- Joined: Sun Jun 12, 2011 3:49 pm
- SketchUp: 8.0.4811
- Location: Montpellier, France
- Contact:
Re: My future new PC computer gamer
Now, the SSD Samsung... (recto/verso)
- Attachments
-
- vue24.jpg (74.65 KiB) Viewed 12956 times
-
- vue25b.jpg (96.21 KiB) Viewed 12956 times
New PC project : http://www.vuedehaut.fr/3D/PC/phantom.html
-
- Posts: 79
- Joined: Sun Jun 12, 2011 3:49 pm
- SketchUp: 8.0.4811
- Location: Montpellier, France
- Contact:
Re: My future new PC computer gamer
Installation of all components on a table brench ...
- Attachments
-
- vue26.jpg (112.75 KiB) Viewed 12956 times
-
- vue27.jpg (111.59 KiB) Viewed 12956 times
-
- vue28.jpg (108.18 KiB) Viewed 12955 times
New PC project : http://www.vuedehaut.fr/3D/PC/phantom.html
-
- Posts: 79
- Joined: Sun Jun 12, 2011 3:49 pm
- SketchUp: 8.0.4811
- Location: Montpellier, France
- Contact:
Re: My future new PC computer gamer
Hi,
To install all the elements I reproduce accurately as possible, here is my concept for a case based on plexiglass.
Cube apertured edges and rounded 324x324x324mm (excluding the height of 4 wheels).
The structure is transparent plexiglass 6mm thick composed of a set 8 piece, laser cut, with 4 plates of plexiglass 2 colors 1mm thick (here in the spirit of Asus ROG).
The assembly is made by gluing and final fitting different pieces together.
The cube is open on both sides and can only receive motherboards micro-ATX format as possible.
Everything is deliberately simple and sober as possible. Functions on / off and reset original being present on the motherboard chosen.
Note: The Coca box is not my 3D model (coca cola zero.skp) but simply to report the scale.
To install all the elements I reproduce accurately as possible, here is my concept for a case based on plexiglass.
Cube apertured edges and rounded 324x324x324mm (excluding the height of 4 wheels).
The structure is transparent plexiglass 6mm thick composed of a set 8 piece, laser cut, with 4 plates of plexiglass 2 colors 1mm thick (here in the spirit of Asus ROG).
The assembly is made by gluing and final fitting different pieces together.
The cube is open on both sides and can only receive motherboards micro-ATX format as possible.
Everything is deliberately simple and sober as possible. Functions on / off and reset original being present on the motherboard chosen.
Note: The Coca box is not my 3D model (coca cola zero.skp) but simply to report the scale.
- Attachments
-
- vue29.jpg (116.33 KiB) Viewed 12955 times
-
- vue30.jpg (205.03 KiB) Viewed 12955 times
-
- vue31.jpg (199.02 KiB) Viewed 12955 times
-
- vue32.jpg (145.57 KiB) Viewed 12955 times
-
- vue33.jpg (156.36 KiB) Viewed 12955 times
-
- vue34.jpg (219.95 KiB) Viewed 12955 times
New PC project : http://www.vuedehaut.fr/3D/PC/phantom.html
-
- Posts: 91
- Joined: Sat Sep 25, 2010 5:30 pm
- SketchUp: 8
- Location: Lincoln, Nebraska
Re: My future new PC computer gamer
Incredibly detailed... Very cool. Is this just for fun?
Who is online
Users browsing this forum: No registered users and 4 guests