Page 1 of 2
How do I make this lampshade?
Posted: Tue May 26, 2020 2:24 pm
by Phil Meadows
I've got a cool pendant lampshade that has a holographic starburst pattern. Is it possible to set materials up in Twilight to use the inter-reflectivity of the glass to cause this effect?
- lampshade.png (541.76 KiB) Viewed 13195 times
Re: How do I make this lampshade?
Posted: Tue May 26, 2020 9:43 pm
by Fletch
Did you build it yet?
It should be possible yes.
Re: How do I make this lampshade?
Posted: Tue May 26, 2020 9:57 pm
by Phil Meadows
I've built a similacrum, once I get home I'll measure it up to get the glass thickness right and redo it.
Will it be a texturing thing you think? Or will I have to make holes and fill them with some other material?
Re: How do I make this lampshade?
Posted: Wed May 27, 2020 8:26 am
by Fletch
Not sure how to make that material as from the image I'm not sure what I'm looking at exactly.
But I made this scene as food for thought.
Take a close look around and let me know what you think.
Render the scene called "Spots" with exposure set to "2" and use Easy 06. Easy 03 has only 5 reflections set - you can try it and see what that looks like. Experiment.
Re: How do I make this lampshade?
Posted: Wed May 27, 2020 2:36 pm
by Phil Meadows
Here's what it looks like IRL: It's set up like a mirror—the outside is smoked a little, and the inside is painted with mirrored silver and has holes or voids in the paint. Light shining through it makes the infinite reflections happen.
- IMG_1889.jpg (1.45 MiB) Viewed 13167 times
- IMG_1890.jpg (1.68 MiB) Viewed 13167 times
I'm going to try texturing the inside just like IRL and see what happens when I place a point light inside and render at easy 09
Re: How do I make this lampshade?
Posted: Wed May 27, 2020 3:13 pm
by Phil Meadows
I don't believe it worked as well as it has.
- Pendant starburst_Scene 1.jpg (188.59 KiB) Viewed 13166 times
The outer material is Architectural Glass: Mirrored Glass, with a blue/gray color from SketchUp
The inner material is Brushed Metal: Silver with this .png:
- starburst pattern with transparency.png (4.58 KiB) Viewed 13166 times
The back side of the outer surface is Architectural Glass: Reflective with a blue color.
I'm going to save this and try manipulating the color of the light from top to bottom with a third shell inside the lampshade that graduates from orange at the top to pink and back to orange at the bottom. the IRL lampshade has these subtle color changes and I think that's the best way to do it—color the light before it hits the shade. Would that work? I'll find out I guess.
Any pointers at this point would be appreciated
Re: How do I make this lampshade?
Posted: Wed May 27, 2020 9:43 pm
by Phil Meadows
Re: How do I make this lampshade?
Posted: Wed May 27, 2020 9:48 pm
by Phil Meadows
- 20_Scene 10.jpg (503.86 KiB) Viewed 13158 times
Here's the context. Looks just about right.
Re: How do I make this lampshade?
Posted: Thu May 28, 2020 12:10 am
by ntxdave
Looks like you worked it all out.
Re: How do I make this lampshade?
Posted: Thu May 28, 2020 5:36 pm
by Fletch
very nice!
Great work - and lovely rendering.