How to wrap a graphic around a curved surface?

bluey01 · Post by **bluey01** » Tue Apr 15, 2014 12:29 pm

Hi, Been successful adding textures and logo to flat walls but can't work out how to add a logo to a curved surface as below shows.

I've tried as an image and as a texture, any ideas?

thanks

Post by **Fletch** » Tue Apr 15, 2014 12:50 pm

Subject: Curved Surface Textures in SketchUp [VIDEO]

bluey01 · Post by **bluey01** » Tue Apr 15, 2014 1:16 pm

great thanks, nearly there I think, just can't seem to get one logo as opposed tiled as below.

I'm on a mac

thanks

Post by **Fletch** » Tue Apr 15, 2014 9:04 pm

You must follow the procedure shown in the link provided above.

bluey01 · Post by **bluey01** » Thu Apr 17, 2014 4:06 pm

I've tried all combinations of keys, as wondered if different on a mac? or because i'm on SU 2014, twilight v 1.5.4?

I just can't seem to get a single logo on the selected geometry as shown below?

Post by **Chris** » Thu Apr 17, 2014 4:10 pm

Twilight Render wouldn't have anything to do with this, as it's purely a SketchUp operation. However, there may be a confusion as to which keys to use. Maybe an experienced OSX + SU user can help out with the key mappings.

Post by **Walt** » Thu Apr 17, 2014 6:20 pm

The eyedropper tool is paint bucket + the command key

also look at this video https://www.youtube.com/watch?v=HHsRRLCAOm8

Twilight Render User Forum

How to wrap a graphic around a curved surface?

How to wrap a graphic around a curved surface?

Re: How to wrap a graphic around a curved surface?

Re: How to wrap a graphic around a curved surface?

Re: How to wrap a graphic around a curved surface?

Re: How to wrap a graphic around a curved surface?

Re: How to wrap a graphic around a curved surface?

Re: How to wrap a graphic around a curved surface?

Who is online