How to make a frosted light bulb?

The Twilight Render Team shares tips, ideas, helpful hints, and more on using Twilight Render
Locked
Fletch
Posts: 12925
Joined: Fri Mar 20, 2009 2:41 pm
OS: PC 64bit
SketchUp: 2016-2023
Contact:

How to make a frosted light bulb?

Post by Fletch » Mon Nov 22, 2021 5:09 pm

See free attached scene for Twilight Render frosted bare light bulb.
  1. To get a frosted bare bulb, put a small point light (1cm radius) inside of the bulb model of 2cm radius or bigger and set the power to 40-60 watts (840 Lumens).
  2. Then paint the glass of the bulb with a color that matches the color of the frosted bulb color you want call it "light bulb glass"
  3. Then apply the Twilight Material Template called "Lamp Glass>Gloss" or "Lamp Glass>Matte" to your "light bulb glass" material - the glossy one will give reflections on the surface even when the light itself is turned off. This assumes that the light bulb you have made does not have a thickness, but is a "thin shell" type of model.
Attachments
bulb-frosted-glowing.jpg
bulb-frosted-glowing.jpg (179.82 KiB) Viewed 82959 times
bulb-frosted-glowing.skp
(408.32 KiB) Downloaded 3414 times
bulb-frosted-glowing-skp.jpg
bulb-frosted-glowing-skp.jpg (76.88 KiB) Viewed 82959 times

Locked

Who is online

Users browsing this forum: No registered users and 1 guest